To a novice, this topic seems to be a simple task. Take some covering material, two boards and an inlay strip. Apply an adhesive onto the covering material. Place the boards and inlay into an exact position, turn-in all four edges and the case for a hardcover binding is finished.

Yes, this sounds simple but there is much more to it. Perhaps the most difficult task to accomplish is the right fit. This alone would justify an article. While being employed in the industry before the age of computers, this writer had to specify the dimensions for all kinds of book cases. These included edition bindings, side-sewn textbooks, limp style, flexible Bible covers, padded covers and many others. In short, a very complex task.

case making

Unlike yesterdays production, binders now must be set-up for short-runs. Each book cover maybe different. Zero set-up and automation is the key for efficient productivity

During Drupa 2008, Kolbus did show us a new linear casemaking machine which produced 100 book cases a minute. Impressive and amazing technology.

The engineers who now head an all-new casemaking machinery enterprise near this writer's home in New Hampshire, GP2 Technology, have produced in the past (20+ years ago) an American case making machine that did cycle at 120 book cases a minute! As the industry changed, they founded an all new company and now concentrate on the short-run, on-demand and photo book markets. Best of all, they have come up with some unique case-making machinery designs. During the last two Drupa's, they were recognized by bookbinding experts from all over the World.

Let us now discuss in short some of the various kinds of book cases.

Edition Binding

The majority of these cases are produced at relative high speeds on automatic case making machines. There are reciprocal double head, and linear designs. The covering materials are fed automatically and receive a very thin, high quality protein glue. The two boards and the inlay must be appropriately spaced, all in accordance to the method of binding used. An adhesive bound book block requires slightly more space in the joints than a sewn binding. This  is to absorb the forces exerted onto the first and last relative fragile leaves. A square back hardcover binding with a board strip as an inlay requires almost double the space in the joint/hinge areas. Children books mostly feature a board strip on the spine.

Many case making machines have a feature, where we feed a single piece of board and then slit it into two panels and a spine strip. Some board suppliers offer pre-assembled board structures called “Unitized Boards.” These are pre-assembled components of boards, often reinforced with a gauze in the joint areas. Another popular task in case making are the so-called three-piece covers where we have different materials on the spine and panels. There are many different options available to produce such covers. Some linear case making machines take the covering materials off a roll. The web receives a thin coat of adhesive. The three different rolls are combined. The cover boards and the inlay are placed-down onto the continuous web. The corners are cut, the sides are turned-in. The last procedure is to cut the web and turn-in head and tail.

On-Demand and Photo Book 

40 years ago, when large quantities were the norm, we, as a highly specialized book manufacturer for reprints and short runs sometimes had to produce only 150 books. We, had to use some ingenuity to cope with such small editions, as each one of the covers were using different covering materials. (Printed cover materials were virtually unknown) We did sort the orders by trim size. Changing the dimension of the case making machine only in the width saved a lot of change-over time.

How times have changed! Now we must be able to produce book cases, one at a time, each being different in size and most important, this tasks must be done in an efficient manner. The most simple versions for case making offer a glue applicator, a jig, a turn-in device and rubber rollers to press assembled cases. This is still considered “assisted” handwork and productivity is accordingly. The next step up toward automation with zero set-up requirements is the GP2 Technology program which offers basically three case making machines. www.gp2tech.com

library corners
Library corners

At Drupa, they introduced a new cost effective model called the EC-3 which was most successfully received by small On-Demand and Photo Book establishments. “Just the right thing as the doctor ordered” said one of my colleagues. The SC-2 Autocase received further improvements and represents the latest generation of leading technology for “one off” and on-demand casemaking. Prior to Drupa 2004, this writer, being so close to the factory, had information on GP2's top model, the Autocase AC 20.

GP2 Technology is also a leader with library corners. For those readers not familiar with it, the corners of the covering material are not cut, they are first turned-in. Thereafter, the edges are turned-in. This results into a slightly rounded corner. Librarians insist on such a technique as they believe, such corners offer better abrasion resistance.

There are of course, as stated earlier, many other cover structures such as flexible covers or some new, economical case making techniques where no boards are used. We will cover those in a future article. 

Send & Share

Request more info

Ремонт ноутбука своими руками. Быстрый и гарантийный ремонт ноутбуков. Срочный ремонт ноутбуков. Ремонт компьютеров на дому. Быстрый ремонт компьютеров своими руками. Настройка и ремонт компьютеров. Java уроки для начинающих. Лучшие java уроки. Учим язык Java с нуля. Обзор смартфонов samsung. Качественный обзор смартфонов samsung galaxy. Обзор смартфона samsung galaxy s4. Фото картинки приколы. Самые новые картинки приколы. Лучшие приколы картинки. Скачать аддоны для wow. Самые новые аддоны для wow скачать. Скачать аддоны для wow быстро и без реги. Видео уроки python. Лучшие python уроки. Учим язык python с нуля. Скачать шаблоны для Joomla. Самые новые joomla шаблоны. Бесплатные шаблоны для Joomla.

Warning: Creating default object from empty value in /home/content/76/14037676/html/modules/mod_accordion_menu/core/MenuBase.php on line 119